Frequently asked questions about PLCs and industrial networks
Frequently asked questions and answers on PROFINET, PLC-to-server connections, data loss, OT segmentation, IEC 62443 and how we work.
Networks and protocolsData and integrationSecurity and complianceProjects and how we work
Networks and protocols
Is PROFINET the same as regular Ethernet?
No. PROFINET is a protocol that runs on Ethernet infrastructure and is designed for the real-time communication needs of automation. Not every switch or topology is suitable for every PROFINET application; RT, IRT or TSN support is verified separately for each device.
What is the difference between an office switch and an industrial switch?
The basic Ethernet function is the same. The difference lies in resistance to temperature, vibration and EMC, DIN-rail mounting, redundant power, ring redundancy protocols and industrial diagnostics. Whether one is needed depends on environmental conditions and how critical the line is.
Do we have to migrate from PROFIBUS to PROFINET?
No. A healthy PROFIBUS segment can be kept; depending on spare parts, expansion and investment plans, and if device support allows, a gradual migration can be planned with a proxy or protocol gateway.
Can we carry control traffic wirelessly?
Some manufacturers offer dedicated solutions; however, latency, interruption and security risks require detailed design and risk assessment. Our default recommendation is to keep control traffic wired.
Data and integration
Can every PLC send data directly to a Linux server?
The same method does not apply to every PLC and firmware. We check the supported protocols, access licences, network permissions and data requirements, and then decide on OPC UA, Modbus TCP, suitable S7 access or a gateway solution.
Is data lost if communication drops?
It depends on the PLC, edge device and application used. Suitable storage and a store-and-forward design reduce the risk of data loss for outages up to the length the local buffer can hold. Do not assume every device buffers on its own; verify it with a planned disconnection test.
Should we connect the PLC directly to the ERP?
In most scenarios, a manageable data integration layer with controlled security and an OT DMZ is preferred over a direct connection. The responsibilities of the control network and business applications should be kept separate.
OPC UA or MQTT?
On devices and systems that support it, OPC UA can present data with its type and context. MQTT delivers messages from publishers to subscribing applications. A project can use one or both. The choice depends on what the field device offers and which application will use the data.
Security and compliance
Do you provide IEC 62443 certification?
No. The services described here are a risk and architecture approach based on IEC 62443 principles; they are not a promise of independent audit or official certification.
Does segmentation stop production?
Changes on a live network can affect production. We first map the existing flows and validate the new rules in a pilot area. We apply migrations that may affect production in a maintenance window approved by the plant, with a rollback plan.
Do you carry out machine safety, CE or SIL assessments?
No. Machine safety, CE conformity and functional safety (SIL) assessments are outside our scope; we recommend working with competent bodies in these areas.
Projects and how we work
Can the work be done without stopping current production?
Reviewing existing records and some passive observation can usually be done while production continues. If a new measurement point has to be installed or the control network has to be changed, we assess the impact with the plant team and agree on a suitable time.
Do you do PLC programming?
We do not develop PLC application software. Our focus is communication, networking, data integration and OT network security; any changes needed on the PLC side are coordinated with the plant’s automation team or the machine manufacturer.
Are you an official reseller of a particular manufacturer?
No. We evaluate products from different manufacturers, including Siemens, against technical criteria; we make no claim of official reseller status or partnership. The manufacturer’s authorised channels apply for product warranty and support.
How is pricing done?
We have no fixed package prices. The first meeting is free of charge; the scope is clarified during the survey, and the proposal sets out phases, deliverables and assumptions separately.
Which regions do you work in?
Based in İzmir, we can work across Türkiye depending on the project; site visits are planned according to location and scope.
Didn't find the answer to your question?
Write your site-specific question; our technical team will review it and get back to you.