Online Industrial Tools
Free online tools for Modbus, PLC, SCADA and OT. Calculations run in your browser; no sign-up or email address required.
Showing 8 tools
Industrial Networks and OT
Modbus addressing and byte order, RTU polling, PLC buffers, 4–20 mA, tag lists, OT inventory and historians.
- Modbus Register Address ConverterConverts the register number in a device manual to the address your SCADA/PLC driver expects.
- Modbus Byte and Word Order DecoderFinds which byte/word order gives the right value by showing all possibilities side by side.
- Modbus RTU Polling Time CalculatorCalculates how many milliseconds it takes to read every device on an RS-485 line once.
- PLC Data Buffer SizingCalculates how large the on-site buffer must be so data is not lost when the central link drops.
- 4–20 mA Scaling CalculatorConverts linearly between current, raw counts and engineering value and shows whether the signal is in a fault zone.
- PLC and SCADA Tag List DiffShows the differences between two tag lists in one table for commissioning and revision checks.
- OT Network Segment and Asset InventoryMatches each device's IP address in the inventory to defined OT segments and finds inconsistencies.
- Historian Storage CalculatorEstimates the space a production data archive takes over the years.
No tool matches your search. Try another word or acronym, or reset the filters.
How these tools work
Most tools process your input only in your browser: staff lists, logs, certificates and inventory files are not uploaded, put in the address bar or sent to analytics.
DNS tools only ask a fixed public DNS-over-HTTPS resolver for the domain name and record type. Each tool page explains the method, assumptions, a worked example and how to read the result.